Nsryjdtyk

Some AWS instances have "ephemeral disks" attached, which are much faster than EBS. But ephemeral disks will be blank and uninitialised when your instance is stopped and started. The data on disk generally survives an instance reboot though.

Question: Should I use a software RAID1 on my AWS instance, built over an ephemeral disk and an EBS volume?

My thinking is that the raid1 will come up in degraded mode with the EBS volume only, and then we can use mdadm commands to add the blank ephemeral disk back into the raid. This will allow the app to start up 5-10 minutes sooner, at the cost of worse performance while the raid1 synchronises.

Background: I have an app that uses ~40 GB of data files. Access times directly corellate with performance, so faster the disk the faster the app works.

Historically we've run something from rc.local to rsync data from an EBS disk to the ephemeral disk, and then started the software. The synch takes 5-10 minutes, better than the 5-20 minutes it took to synch from another instance. In the past we've even used the data files from a ramdisk, which was not as fast as the ephemeral disks.

More info - this is an i3.4xlarge so it has 2x NVME ephemeral drives.

# hdparm -t /dev/md? /dev/nvme?n1 /dev/xvd?

/dev/md0:     9510 MB in  3.00 seconds = 3169.78 MB/sec RAID0 of two eph drives

/dev/nvme0n1: 4008 MB in  3.00 seconds = 1335.74 MB/sec Eph drive

/dev/nvme1n1: 4014 MB in  3.00 seconds = 1337.48 MB/sec Eph drive

/dev/xvda:     524 MB in  3.01 seconds = 174.17 MB/sec  gp2 16GB, 100 IOPs root

/dev/xvdf:     524 MB in  3.01 seconds = 174.23 MB/sec  gp2 120GB, 300 IOPs data

/dev/xvdz:     874 MB in  3.01 seconds = 290.68 MB/sec  gp2 500GB, 1500 IOPs raid-seed disk

I have created a raid1 with

mdadm  --create /dev/md1 --raid-devices=3 --verbose --level=1 /dev/nvme?n1 /dev/xvdz

which returns:

$ cat /proc/mdstat

Personalities : [raid0] [raid1]

md1 : active raid1 nvme1n1[4] nvme0n1[3] xvdz[2]

      524155904 blocks super 1.2 [3/3] [UUU]

      bitmap: 0/4 pages [0KB], 65536KB chunk

Curiously, the raid reads about as fast as the faster drives, and is not limited to the speed of the slowest disk.

/dev/md1:     4042 MB in  3.00 seconds = 1346.67 MB/sec

/dev/nvme0n1: 4104 MB in  3.00 seconds = 1367.62 MB/sec

/dev/nvme1n1: 4030 MB in  3.00 seconds = 1342.93 MB/sec

/dev/xvdz:     668 MB in  3.01 seconds = 222.26 MB/sec

A power-off/on returns a degraded raidset, but the app can still run albeit slower. The cost of waiting 5-10 minutes is avoided, and I can re-add the ephemeral disks to the raid on the fly without an app restart.

So while it seems to work perfectly, is there anything I've missed or not considered?

Hmm, I'm not sure I would want to mix two so different volumes in a single RAID1. If you do that half of your requests will be served from the slower EBS and half from the faster instance storage and that may lead to quite an unpredictable performance. I would look at standard tools to achieve a better performance.

Look at Provisioned IOPS EBS disks (if you need high random-access IO) or Throughput optimised EBS (if you're sequentially reading large files). They may provide the performance you need out of the box. The pricing is here.

You should also look at some caching, especially as it's mostly read-only contents as you say. Every time the file is needed you can have a look in the local cache dir on the ephemeral storage and if it's there serve it from there. If not take it from EBS and save a copy in the cache. Especially if it's all read only it should be quite a simple caching layer.

Or if the files on EBS are database files (which I suspect may be the case) cache the results of your queries or processing in Memcache or Redis or in the database native cache (e.g. MySQL Query Cache).

Hope that helps :)